Timber & Finish

All Bereco products are fully factory finished as standard with a choice of softwood or hardwood engineered timber.

Bereco Windows Paint Finish

Paint It.

Introduce a splash of colour with your choice of any RAL, BS or NCS colour.

Bereco can match farrow and ball colours

Match It.

We can replicate any colour from the Farrow & Ball range.

Bereco Windows Stain Finish

Stain It.

Our range of translucent stains add colour whilst allowing the natural character, grain and beauty of the timber to show through.

Bereco Frame & leaf Finish

Frame It.

A contrasting door frame & leaf or window sash & frame creates a design statement.

Dual Colour.

Bereco are one of the few companies to offer dual colour paint and stain options on both finishes to suit internal decor and external facade.

Paint Application Scheme

Bereco are one of only 2 suppliers in the UK with membership to the BM TRADA Q-Mark Paint Application Scheme. Membership to the scheme is voluntary and demonstrates our continued commitment to supplying products that are factory finished to the highest possible standard.

The whole paint application process is fully documented and monitored to ensure coatings are applied in the correct environment, using the correct tools by personnel that are trained to the highest standards. The paint system used in our factory is regularly audited by BM TRADA to ensure a consistent finish is achieved on all products.

Bereco Maintenance Kit

Maintenance of the finish of Bereco products

After the installation of your Bereco products maintaining the weather resistance and water repellent properties of the coating on your Bereco products is very important to keep your windows looking new and performing for years to come.

Our care sets have been specially developed to keep the finish looking like the day your products were installed whilst maintaining the all important weather resistance and water repellent properties of the coating.

All Bereco products are supplied in softwood or hardwood.

Softwood products are manufactured using defect free, laminated Scandinavian Pine with either a clear or finger jointed surface.

Hardwood products are manufactured using defect free, laminated Dark Red Meranti with a clear surface.

Engineered or Multi Layered Timber

Engineered or multi-layered timber is used throughout our ranges and products. Opposing grain direction, combined with removal of the natural defects inherent in timber such as knots and shakes help add significant strength to product sections.

Safe in the knowledge no defects are located around critical locations, engineered timber is also key to reducing the effects of warp and twist ensuring longevity and performance.

Finger Jointed or Clear Timber

Finger jointed timber is used on Redwood products with a painted finish. This is a cost effective option and joints in the timber cannot be seen through the paint.

Clear timber is used on all Hardwood products and on Redwood products with a stained finish. Clear faced timber ensures no grain change is visible through finger joints.

The 4 stage finishing process of preservation, base-coat and two top coats give softwood products a smooth finish and hardwood a pitted effect due to its open pore structure.

Preservative Treatment

Penetrating deep into the timber the preservative treatment offers protection against rot and fungal decay, stabilises the timber against the risk of twist and warp and promotes even colour on final application.


Ensures the perfect surface for application of subsequent coats, even colour and deeper translucent stain colours on final coat application.

Intermediate Coat & Joint / Grain protection

Coating and sealing of end grain and v joints provides the timber their all important protection from the elements, our flexible joint sealant allows the timber to breath whilst leaving the coating unaffected by cracking.

Final Coat

Providing the products with their final weather resistant coating, and featuring UV absorbers to prolong the durability of the finish